🛠 Up-Keep Grime-B-Gone Pressure Wash Solution

Heavy-Duty Alkaline Cleaner for Hot Water & Steam Pressure Washing

Overview
Up-Keep Grime-B-Gone Pressure Wash Solution is a high-alkaline, heavy-duty cleaner and degreaser formulated specifically for use in hot water pressure washers and steam cleaning systems. It rapidly breaks down oil, grease, carbon deposits, road film, and industrial grime on hard surfaces commonly found in commercial, agricultural, and industrial environments.

The concentrated formula is designed to perform under high-temperature conditions without scaling or damaging heating coils. Built-in corrosion inhibitors help protect metal surfaces and equipment, while flexible dilution ratios allow operators to tailor cleaning strength for light, medium, or heavy soil loads. When used as directed, it delivers powerful cleaning performance while supporting equipment longevity.

✅ What This Product Is Used For
• Removing oil and grease from hard surfaces
• Breaking down carbon deposits and road film
• Cleaning industrial equipment and machinery
• Degreasing vehicles, engines, and heavy equipment
• High-temperature pressure washing and steam cleaning

❌ What This Product Is Not For
• Not intended for use on aluminum surfaces
• Not a disinfectant or sanitizer
• Not for household or consumer-grade equipment
• Not designed for delicate or soft surfaces
• Not for use without proper dilution and PPE

⚙️ Key Performance Advantages
• Formulated for hot water and steam pressure washers
• Adjustable dilution supports multiple cleaning intensities
• Non-scaling formula protects heating coils
• Corrosion inhibitors help protect metal surfaces
• Fast-acting alkaline chemistry reduces cleaning time

🏢 / 🏥 / 🧼 Common Use Environments
• Industrial facilities and workshops
• Agricultural equipment and farm operations
• Fleet washing and vehicle maintenance
• Concrete pads, loading docks, and service bays
• Gutters, machinery housings, and hard exterior surfaces

❓ Frequently Asked Questions

What makes this cleaner suitable for steam and hot water systems?
It is formulated to remain stable at high temperatures and will not scale or damage heating coils when used as directed.

Can the dilution be adjusted?
Yes. The concentrate can be diluted for light, medium, or heavy cleaning depending on soil conditions.

Is it safe for metal surfaces?
Yes. The formula contains corrosion inhibitors, but it should not be used on aluminum.

Does it remove carbon and road film?
Yes. It is designed to dissolve carbon deposits, grease, oil, and road film quickly.

Is rinsing required after use?
Yes. Surfaces and equipment should be rinsed thoroughly with clean water after cleaning.

🧪 Active Ingredient(s) or Core Composition
• Water – Carrier for controlled dilution and application
• Sodium Metasilicate – Alkaline builder that dissolves heavy grease and carbon
• Sodium Tripolyphosphate – Breaks down stubborn soils and road film
• Sodium Laureth Sulfate – Surfactant that lifts and suspends grime
• Potassium Hydroxide – Powerful degreasing agent

📌 Directions for Use (Summary)
Adjust the pressure washer or steam cleaner feed rate to achieve a dilution of 1:20 for heavy cleaning or 1:40 for lighter soil loads.
Apply using high-pressure spray equipment.
Rinse cleaned surfaces and flush equipment with clean water after use.
Do not use on aluminum. Spot test painted surfaces before full application.

⚠️ Safety & Handling
Danger. May be corrosive to metals. Causes severe skin burns and eye damage. Do not breathe mist or spray. Wear protective gloves, protective clothing, and eye protection. Wash thoroughly after handling. Store locked up in a corrosion-resistant container. Keep out of reach of children.
⚠️ California Proposition 65 Warning: This product can expose users to ethylene oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Compounds, cleaning, liquid (Potassium Hydroxide)
Hazard Class: 8
ID Number: UN1760
Packing Group: III

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).