Description
🛠 Syntha Solve Soak & Save Rust Remover
pH-neutral, non-toxic soak solution formulated to remove rust from metal without scrubbing.
Overview
Syntha Solve Soak & Save Rust Remover is a pH-neutral, non-corrosive rust removal solution designed to eliminate rust from metal surfaces without scrubbing or abrasion. The formula safely dissolves rust while leaving the underlying metal intact, making it ideal for restoring tools, hardware, automotive parts, and industrial components.
The non-toxic, biodegradable, and non-flammable formulation is safe for use on metals as well as surrounding materials including rubber, plastic, vinyl, PVC, aluminum, copper, and brass. After treatment and drying, cleaned parts are protected against flash rusting for weeks, reducing the need for immediate coatings or oils.
✅ What This Product Is Used For
• Removing rust from metal parts without scrubbing
• Restoring tools, hardware, and mechanical components
• Preparing metal surfaces for painting or coating
• Removing oxidation without damaging base metal
• Preventing flash rust after cleaning
❌ What This Product Is Not For
• Polishing or brightening non-rusted metal
• Removing scale caused by acids or mineral buildup
• Use on energized electrical equipment
• Applications requiring abrasive action
⚙️ Key Performance Advantages
• Soak-only rust removal—no scrubbing required
• pH-neutral, non-corrosive formula
• Non-toxic, biodegradable, and non-flammable
• Safe on rubber, plastics, and soft metals
• Inhibits flash rusting for weeks after treatment
• Reusable until solution is exhausted
🏢 Common Use Environments
• Maintenance and repair shops
• Automotive and mechanical service areas
• Industrial facilities
• Tool rooms and fabrication shops
• Commercial and institutional maintenance
❓ Frequently Asked Questions
Does this require scrubbing or brushing?
No. Rust is removed through soaking alone. Scrubbing is not required.
How long do parts need to soak?
Light rust may be removed in a few hours. Heavy rust may require overnight soaking.
Will this damage aluminum, brass, or copper?
No. The pH-neutral formula is safe for aluminum, copper, brass, rubber, plastics, and vinyl.
Does it prevent flash rust after cleaning?
Yes. Treated parts resist flash rusting for weeks after drying.
Can the solution be reused?
Yes. The solution can be reused until it no longer removes rust effectively.
🧪 Active Ingredient(s) or Core Composition
• Water – Carrier for active components
• Tetrasodium Etidronate (HEDP) – Chelating agent that breaks down rust
• Polymers – Aid in lifting and suspending rust
• Sodium Sulfite – Flash-rust inhibitor
• Sodium Dodecyl Diphenyl Ether Disulfonate – Surfactant for surface penetration
• Phosphoric Acid – pH control and rust-removal support
📌 Directions for Use (Summary)
Remove loose rust, dirt, oil, and grease prior to treatment. Fully submerge the rusted item in the solution. Allow to soak for several hours for light rust or overnight for heavy rust. Once rust is removed, rinse thoroughly with water and towel dry or air dry. The solution may be reused until no longer effective.
⚠️ Safety & Handling
WARNING. Causes serious eye irritation. Wash thoroughly after handling. Wear protective gloves, protective clothing, and eye protection. If in eyes, rinse cautiously with water for several minutes and seek medical attention if irritation persists. Keep out of reach of children.
🚛 Shipping & Compliance Notice
• Proper Shipping Name: None
• Hazard Class: None
• ID Number: None
• Packing Group: None