Description
🧊 Syntha Solve Rapid Thaw Ice Solution
Fast-acting liquid deicer formulated to penetrate and dissolve ice and snow in extreme cold conditions.
Overview
Syntha Solve Rapid Thaw Ice Solution is a fast-acting, glycol-based liquid deicer designed to quickly penetrate and dissolve frost, snow, and ice on a wide range of surfaces. The formulation works immediately on contact, reducing ice buildup and helping prevent re-freezing when applied as directed.
This non-corrosive, residue-free solution is effective in extreme cold temperatures down to −60°F, making it well suited for industrial, commercial, and infrastructure applications where pelletized deicers are ineffective or damaging. It may be used on asphalt, concrete, terrazzo, aluminum, steel, plastic, rubber, and painted surfaces without leaving residue.
✅ What This Product Is Used For
• Melting ice and snow on walkways and hard surfaces
• Preventing ice buildup and re-freezing
• Deicing bridges, ramps, stairs, and loading docks
• Keeping locks, chains, hinges, and linkages from freezing
• Industrial and commercial winter safety maintenance
❌ What This Product Is Not For
• Use on food-contact surfaces
• Application to potable water systems
• Use as a corrosion inhibitor or lubricant
• Residential indoor use
• Application inconsistent with liquid deicer practices
⚙️ Key Performance Advantages
• Rapid ice penetration and melting action
• Effective to temperatures as low as −60°F
• Non-corrosive and residue-free formulation
• Ready-to-use liquid—no mixing required
• Safer alternative to abrasive deicing pellets
🏢 Common Use Environments
• Sidewalks and driveways
• Bridges and ramps
• Loading docks and stairways
• Industrial facilities and warehouses
• Equipment, conveyors, and mechanical components
❓ Frequently Asked Questions
How cold can this product work effectively?
It remains effective in temperatures down to −60°F when used as directed.
Does it leave residue on surfaces?
No. The formula is designed to leave no residue after ice and snow are melted.
Can it damage concrete or masonry?
It may be safely used on properly constructed and aged concrete, cement, brick, and flagstone. Poorly constructed or insufficiently aged surfaces may be susceptible to freeze-thaw damage.
Is reapplication necessary?
Yes. As the product becomes diluted while melting ice, reapplication may be required, especially on thicker ice.
Can this be used on metal and painted surfaces?
Yes. It is safe for aluminum, steel, plastic, rubber, and painted surfaces when used as directed.
🧪 Active Ingredient(s) or Core Composition
• Water (CAS 7732-18-5) – Carrier for active components
• Ethylene Glycol (CAS 107-21-1) – Primary freeze-point depressant
• Methanol (CAS 67-56-1) – Enhances rapid ice penetration
• Diethylene Glycol (CAS 111-46-6) – Extends deicing performance
• Acid Green 1 (CAS 19381-50-1) – Visual application indicator
📌 Directions for Use (Summary)
Apply directly by spraying, pouring, sprinkling, or swabbing onto ice or snow-covered surfaces.
For thin ice, apply approximately 1 gallon per 1,000 square feet.
Thicker ice may require additional product or reapplication.
Scoring glazed ice surfaces can improve penetration and speed melting.
Remove slush and meltwater to reduce freeze-thaw damage on concrete.
⚠️ Safety & Handling
DANGER. Flammable liquid and vapor. Harmful if swallowed, inhaled, or in contact with skin. Causes skin irritation. May damage fertility or the unborn child and may harm breast-fed children. Causes damage to organs (blood, central nervous system, eyes) by inhalation and kidneys through prolonged or repeated oral exposure. Avoid breathing vapors or mist. Avoid contact during pregnancy or nursing. Wear protective gloves, clothing, and eye protection. Use only outdoors or in well-ventilated areas. Keep away from heat, sparks, and open flame. Keep out of reach of children.
🚛 Shipping & Compliance Notice
• Proper Shipping Name: Flammable liquids, n.o.s. (methanol)
• Hazard Class: 3
• UN Number: UN1993
• Packing Group: III