🌟 Spotless Ox Hydro-Etch Pro Concrete Surface Prep

A high-pH hydrogen peroxide concrete cleaner designed to lift deep oil and grease stains while preparing concrete surfaces for etching, sealing, and decorative treatments.

Overview

Spotless Ox Hydro-Etch Pro Concrete Surface Prep is a professional-grade concrete cleaner and surface preparation solution formulated to remove deeply embedded oil, grease, and soil stains from concrete surfaces. Powered by a stable, high-pH hydrogen peroxide system, it remains active longer than standard oxygen-based cleaners, allowing it to penetrate pores and lift contaminants that may have been trapped in concrete for years.

The formulation also incorporates effective surfactants to enhance soil release, making it an ideal pre-treatment step before etching, sealing, or decorative staining. By removing oils and residues that interfere with adhesion, it helps ensure more consistent results and better long-term performance of subsequent surface treatments. The product rinses clean with water and leaves no residue that could inhibit follow-up processes.

✅ What This Product Is Used For
• Removing heavy oil and grease stains from concrete
• Lifting long-set stains from porous concrete surfaces
• Preparing concrete for etching or sealing
• Surface preparation prior to decorative staining
• Restoring the natural appearance of concrete

❌ What This Product Is Not For
• Use on polished or sealed concrete without testing
• Application on non-concrete surfaces
• Use as a general-purpose floor cleaner
• Application on acid-sensitive materials
• Situations where required PPE cannot be worn

⚙️ Key Performance Advantages
• High-pH hydrogen peroxide remains active longer
• Penetrates porous concrete to lift embedded stains
• Enhances effectiveness of surfactants for better cleaning
• Prepares surfaces for improved adhesion of coatings
• Rinses clean with no residue left behind

🏢 Common Use Environments
• Garages and workshops
• Warehouses and industrial floors
• Automotive service areas
• Driveways and parking areas
• Shops and equipment bays

❓ Frequently Asked Questions

What makes this different from other oxygen cleaners?
It is formulated at a higher pH, allowing hydrogen peroxide to remain more active for longer periods, resulting in deeper and more effective stain removal.

Can this be used before sealing or staining concrete?
Yes. It is specifically designed to remove contaminants that interfere with etching, sealing, and decorative staining.

Will this remove old oil stains?
Yes. It is effective at lifting oil and grease stains that have been embedded in concrete for years.

Does this require neutralizing after use?
No. It rinses clean with water when used as directed.

Is this a concentrate?
Yes. It can be diluted for lighter soils or used full strength for heavy contamination.

Should I test before use?
Yes. Always test in an inconspicuous area prior to full application.

🧪 Active Ingredient(s) or Core Composition
• Hydrogen Peroxide – Oxidizes and lifts embedded organic stains
• Surfactant Blend – Breaks down and releases grease and soils
• Sodium Hydroxide – Raises pH to enhance peroxide and surfactant performance
• Water – Carrier for the formulation

📌 Directions for Use
Always test in an inconspicuous area before use. For light soils and stains, dilute one part product with five parts water, apply to the surface, and allow the solution to penetrate for 5–10 minutes until deposits are loosened, then rinse thoroughly with clean water. For heavy oil stains and grease, use the product undiluted, pouring or spraying directly onto the stained area. Allow to penetrate for 5–10 minutes, then rinse thoroughly with clean water. Do not allow the product to dry on the surface.

⚠️ Safety & Handling
Danger. Causes skin irritation and serious eye damage. Avoid contact with skin and eyes and wear appropriate protective gloves, clothing, and eye protection during use. Wash thoroughly after handling. Keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: None
Hazard Class: None
ID Number: None
Packing Group: None

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).