Seismiclean Stainless Steel Cleaner Wipes

(40 Wipes Per Canister X 6 Canisters Per Case)

Pre-moistened stainless steel wipes that clean, polish, and protect metal surfaces while leaving a streak-free, corrosion-resistant finish.

Overview
Seismiclean Stainless Steel Cleaner Wipes are dual-sided, pre-moistened wipes engineered to clean, polish, and protect stainless steel in a single step. The textured side loosens water spots, food residue, fingerprints, and grime, while the smooth side wipes surfaces clean and leaves behind a clear protective coating. This coating helps resist water marks, oxidation, and corrosion, keeping stainless steel surfaces bright, clean, and professional with minimal effort. The VOC-compliant formula is also suitable for other metals, including chrome, brass, silver, and copper.

✅ What This Product Is Used For

• Cleaning and polishing stainless steel surfaces
• Removing fingerprints, smudges, and food spills
• Eliminating hard-water stains and residue
• Protecting metal surfaces from water marks and corrosion
• Restoring shine to appliances, fixtures, and panels

❌ What This Product Is Not For

• Use on skin or as a personal wipe
• Use on non-metal or porous surfaces
• Flushing wipes down toilets or drains
• Mixing with other cleaners or chemicals
• Residential consumer applications

⚙️ Key Performance Advantages

• Dual-sided towel for scrubbing and finishing
• Cleans, polishes, and protects in one step
• Leaves a clear, corrosion-resistant coating
• Helps prevent water marks and oxidation
• VOC-compliant formulation for professional facilities

🏢 Common Use Environments

• Commercial kitchens and foodservice facilities
• Elevators, escalator walls, and building interiors
• Vending machines and beverage dispensers
• Restroom partitions and fixtures
• Industrial and institutional facilities

❓ Frequently Asked Questions

Do these wipes leave a protective coating behind?
Yes. As they clean, the wipes deposit a clear coating that helps protect metal surfaces from oxidation, corrosion, and water marks.

Are the wipes abrasive?
Each towel has a textured side for scrubbing deposits and a smooth side for wiping and polishing.

Can these wipes be used on metals other than stainless steel?
Yes. They may also be used on brass, silver, chrome, and copper surfaces.

Is buffing required after use?
Buffing is optional. For a higher shine, lightly buff with a soft, dry towel after wiping.

Are these wipes flushable?
No. Used wipes must be disposed of in the trash.

🧪 Active Ingredient(s) or Core Composition

• Hydrotreated Light Alkanes – Dissolve grease, grime, and residues
• Mineral Oil – Enhances shine and helps prevent streaking
• Blend of Nonionic Esters – Conditions and protects metal surfaces
• d-Limonene – Assists with degreasing and cleaning performance
• Orange Oil – Supports soil removal and surface brightening
• Benzyl Alcohol – Aids solvency and formulation stability
• Linalool – Contributes to fragrance profile
• Citral – Supports fragrance and cleaning effectiveness

📌 Directions for Use (Summary)
Remove the lid by lifting upward and remove the foil seal.
Pull a towel from the center of the roll and thread it through the “X” on the underside of the lid.
Close the lid and pull the towel at a 90-degree angle.
Use the abrasive side of the towel to scrub the surface until stains and deposits disappear.
Flip to the smooth side and wipe the surface clean.
Discard the used towel after use.
For a higher shine, lightly buff with a soft, dry towel.

⚠️ Safety & Handling
DANGER: May be fatal if swallowed and enters airways. Avoid breathing fumes. May cause an allergic skin reaction. Wear protective gloves and eye protection. If swallowed, immediately call a doctor or poison center. Do not induce vomiting. If on skin, wash with plenty of water. Store locked up. Keep out of reach of children.

🚛 Shipping & Compliance Notice

• Proper Shipping Name: Not regulated
• Hazard Class: Not regulated
• Identification Number: None
• Packing Group: None

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).