Seismiclean Revitalizing Oven Cleaner

(20 Ounce Cans × 12 Cans Per Case)

Heavy-duty aerosol oven cleaner formulated to dissolve baked-on grease and carbon from ovens and caustic-resistant cookware

Overview
Seismiclean Revitalizing Oven Cleaner is a powerful alkaline aerosol cleaner designed to remove heavy grease, baked-on food, and carbon deposits from ovens and other caustic-resistant cooking surfaces. The fast-acting formula clings to vertical and horizontal surfaces, allowing it to penetrate stubborn buildup without excessive scraping. When used as directed, it is suitable for commercial and residential kitchens where heavy soil accumulation requires aggressive cleaning performance.

✅ What This Product Is Used For

• Cleaning cold or warm empty ovens
• Removing baked-on grease and carbon buildup
• Degreasing grills, fry pans, and caustic-resistant cookware
• Cleaning oven racks and interior oven surfaces
• Heavy-duty kitchen equipment maintenance

❌ What This Product Is Not For

• Aluminum or anodized aluminum surfaces
• Painted or varnished surfaces
• Chrome, copper, or laminated plastics
• Self-cleaning or continuous-clean ovens
• Light bulbs, electrical contacts, switches, thermostats, heating elements, or glass doors

⚙️ Key Performance Advantages

• Strong alkaline formula dissolves heavy carbon and grease
• Aerosol spray provides even surface coverage
• Effective on both cold and warm ovens
• Reduces scraping and abrasive scrubbing
• Suitable for caustic-resistant cookware and equipment

🏢 Common Use Environments

• Commercial kitchens and restaurants
• Institutional foodservice operations
• Bakeries and commissaries
• Heavy-use residential kitchens
• Food preparation areas with caustic-resistant surfaces

❓ Frequently Asked Questions

What surfaces can Seismiclean Revitalizing Oven Cleaner be used on?
It is intended for caustic-resistant ovens, oven racks, grills, fry pans, and cookware.

Can this oven cleaner be used on warm ovens?
Yes, it may be used on empty ovens that are either cold or preheated to approximately 200°F.

Is Seismiclean Revitalizing Oven Cleaner safe for aluminum?
No, it should not be used on aluminum or anodized aluminum surfaces.

How long should the cleaner sit on the surface?
Typical dwell time is up to 30 minutes. For heavy buildup, it may be left on overnight.

Does this product require scraping?
Most soils wipe away after dwell time. Some stubborn deposits may require light scrubbing with a cloth or sponge.

Can this cleaner be used on cookware?
Yes, it is suitable for fry pans, roasting pans, and other caustic-resistant cookware.

🧪 Active Ingredient(s) or Core Composition

• Water – Carrier for the formulation
• Butoxyethanol – Solvent that penetrates grease and baked-on soils
• Sodium Hydroxide – Alkaline agent that dissolves carbon and grease
• Propane – Aerosol propellant
• n-Butane – Aerosol propellant

📌 Directions for Use

Use only on an empty oven. Oven may be cold or preheated to approximately 200°F, then turned off. Hold container upright and spray a thin, even coating from 6 to 12 inches away. Shake well before spraying. Spray remaining oven surfaces and allow cleaner to stand for up to 30 minutes. For heavy buildup, product may be left on overnight. Wipe oven clean with a damp cloth, sponge, or paper towel. Remove stubborn spots with additional wiping and rinse with potable water. For extremely heavy buildup, reapply product, heat oven to 400°F for 10 minutes, turn off heat, allow to cool, then wipe clean.

⚠️ Safety & Handling
DANGER: Extremely flammable aerosol. Causes severe skin burns and serious eye damage. Keep away from heat, sparks, and open flame. Pressurized container may burst if heated. Wear protective gloves, eye protection, and clothing. Avoid breathing spray. Use in well-ventilated areas. Keep out of reach of children.

🚛 Shipping & Compliance Notice

• Proper Shipping Name: Consumer Commodity
• Hazard Class: ORM-D
• Identification Number: None
• Packing Group: None

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).