Seismiclean Foaming Tile & Shower Cleaner

Removes tough mineral stains and soap scum with a thick, clinging foam designed for vertical bathroom surfaces

Overview
Seismiclean Foaming Tile & Shower Cleaner is a non-abrasive, acid-based bathroom cleaner formulated to remove hard-water deposits, soap scum, iron stains, and mineral buildup from tubs, tile, and bath fixtures. The thick foaming action clings to vertical and hard-to-reach surfaces, allowing extended contact time so soils dissolve without aggressive scrubbing. Designed for professional environments, it delivers powerful cleaning performance while producing fewer streaks and minimal fumes compared to harsher alternatives.

✅ What This Product Is Used For

• Removing soap scum from tubs and showers
• Dissolving hard-water and mineral deposits
• Eliminating iron and rust stains
• Cleaning tile walls, grout, and bath fixtures
• Deep-cleaning vertical bathroom surfaces

❌ What This Product Is Not For

• Marble surfaces
• Colored grout
• Polished aluminum
• Use on skin or as a personal cleaner
• Mixing with other cleaning chemicals

⚙️ Key Performance Advantages

• Thick foam clings to vertical surfaces
• Acid-based formula breaks down mineral buildup quickly
• Removes tough stains without abrasive scrubbing
• Ready-to-use for fast application
• Leaves fewer streaks on cleaned surfaces

🏢 Common Use Environments

• Commercial restrooms
• Hotels and hospitality facilities
• Schools and institutional bathrooms
• Healthcare and long-term care facilities
• Industrial and janitorial operations

❓ Frequently Asked Questions

Does this product require scrubbing?
In most cases, no. The clinging foam allows soils to break down with minimal agitation.

Can this be used on grout?
Yes, on standard grout. Do not use on colored grout.

Is this safe for fiberglass and porcelain?
Yes. It is safe for fiberglass, porcelain, tile, and most bath fixtures when used as directed.

Does it work on iron and rust stains?
Yes. The acid blend is effective at dissolving iron stains and mineral deposits.

Is this a ready-to-use product?
Yes. No dilution is required.

🧪 Active Ingredient(s) or Core Composition

• Water – Base solvent
• Glycolic Acid – Breaks down hard-water stains and soap scum
• Sulfamic Acid – Dissolves mineral and iron deposits
• Sodium Lauriminodipropionate – Enhances foam and cleaning action
• Isopropanol – Aids drying and reduces streaking

📌 Directions for Use (Summary)
Use a foaming trigger sprayer for best results.
Apply foam to the surface and allow it to work for several seconds.
Wipe away soils and stains with a damp sponge or cloth, or rinse with clean water.
Do not use on marble, colored grout, or polished aluminum surfaces.

⚠️ Safety & Handling
DANGER: Causes severe skin burns and eye damage. Do not breathe mist or spray. Wear protective gloves, protective clothing, and eye protection. Wash thoroughly after handling. If swallowed, rinse mouth and do not induce vomiting. If on skin or hair, remove contaminated clothing and rinse with water. If inhaled, move to fresh air. If in eyes, rinse cautiously with water for several minutes and seek medical attention. Store locked up. Keep out of reach of children.

🚛 Shipping & Compliance Notice

• Proper Shipping Name: Sulfamic Acid Solutions
• Hazard Class: 8
• Identification Number: UN 2967
• Packing Group: Not specified

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).