HD Dynamics BoilerMate Oxygen Minimizer

A catalyzed oxygen scavenger formulated to rapidly remove dissolved oxygen from boiler feedwater and protect internal system surfaces from corrosion and pitting.

Overview

HD Dynamics BoilerMate Oxygen Minimizer is a high-performance, catalyzed oxygen scavenger designed to protect boiler systems by quickly removing dissolved oxygen from feedwater before it can attack metal surfaces. Dissolved oxygen is one of the primary causes of pitting, corrosion, and premature equipment failure in boilers, condensate return lines, and associated piping.

This product reacts rapidly with oxygen and is effective in systems with or without a deaerator. It is fully compatible with standard scale and corrosion inhibitor programs and may be fed directly into the boiler, condensate return tank, or feedwater system. BoilerMate Oxygen Minimizer is commonly used in steam boilers and closed-loop recirculating systems where long-term asset protection and operational efficiency are critical.

✅ What This Product Is Used For
• Removing dissolved oxygen from boiler feedwater
• Preventing oxygen pitting and corrosion
• Protecting internal boiler and piping surfaces
• Supporting long-term boiler system reliability
• Use in steam boilers and closed-loop systems

❌ What This Product Is Not For
• Use outside boiler or closed-loop water systems
• Application as a general-purpose corrosion inhibitor alone
• Use in potable water systems
• Consumer or residential applications
• Use without proper monitoring and control

⚙️ Key Performance Advantages
• Rapid oxygen scavenging action
• Catalyzed formulation for faster reaction rates
• Effective with or without a deaerator
• Compatible with existing treatment programs
• Helps extend boiler and equipment life

🏭 Common Use Environments
• Steam boiler systems
• Condensate return systems
• Industrial heating plants
• Commercial boiler rooms
• Closed-loop recirculating systems

❓ Frequently Asked Questions

What problem does this product solve?
It removes dissolved oxygen from boiler feedwater, preventing corrosion and pitting.

Does it require a deaerator to work?
No. It is effective in systems both with and without a deaerator.

Can it be used with other boiler treatment chemicals?
Yes. It is compatible with scale and corrosion inhibitors and can be fed alongside them.

How is performance monitored?
By maintaining a sulfite residual within the recommended ppm range.

Where should it be fed into the system?
It may be fed continuously into the condensate return tank, feedwater system, or directly into the boiler.

Is continuous feed recommended?
Yes. Continuous feed provides the most consistent oxygen control.

🧪 Active Ingredient(s) or Core Composition
• Sodium Metabisulfite – Primary oxygen scavenger
• Sodium Sulfite – Enhances oxygen removal efficiency
• Cobalt Monosulfate Heptahydrate – Catalyst to accelerate oxygen scavenging
• Water – Carrier for controlled system application

📌 Directions for Use
This product is recommended for continuous feed into the boiler system. Dosage depends on the oxygen content of the feedwater and system temperature. Maintain a sulfite residual between 20–40 ppm in the boiler water to ensure proper oxygen control. The product may be fed into the condensate return tank, feedwater system, or directly into the boiler. When feeding from a solution tank, protect the solution from atmospheric oxygen exposure. Adjust feed rate as needed based on system demand and testing results.

⚠️ Safety & Handling
Danger. Causes serious eye damage. Wear protective gloves, protective clothing, and eye protection when handling. If product contacts eyes, rinse cautiously with water for several minutes and seek immediate medical attention. This product contains cobalt compounds, which may pose health risks with repeated exposure. Use only in controlled industrial environments and keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: None
Hazard Class: None
ID Number: None
Packing Group: None

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).