Fab Floors Terrazo-Pro Stone Floor Sealer

A water-based, urethane-fortified floor sealer engineered to bond with terrazzo and porous stone surfaces while providing a durable base for high-performance acrylic finishes.

Overview
Fab Floors Terrazo-Pro Stone Floor Sealer is a premium urethane-fortified sealer developed to address the unique challenges of maintaining terrazzo and porous stone floors. The formulation establishes a strong, reversible bond with stone substrates to ensure adhesion while creating a smooth, level surface that enhances the appearance and performance of subsequent finishes. Urethane modifiers reinforce the acrylic matrix, improving durability, resistance to wear, and long-term finish stability. When used as directed, this sealer maximizes gloss potential and serves as an ideal foundation for finishes subjected to burnishing or spray buffing.

For Use On Terrazzo Floors

✅ What This Product Is Used For
• Sealing terrazzo and porous stone flooring
• Providing a durable base coat for acrylic floor finishes
• Improving adhesion of finishes on porous substrates
• Leveling surface imperfections to enhance gloss potential
• Extending finish life in high-traffic areas

❌ What This Product Is Not For
• Non-porous flooring surfaces
• Use on dirty or improperly stripped floors
• Residential consumer applications
• Application with contaminated mops or buckets
• Use without proper drying time between coats

⚙️ Key Performance Advantages
• Urethane-fortified formulation enhances strength and durability
• Creates a smooth, level base that maximizes finish gloss
• Designed for finishes subjected to burnishing and spray buffing
• Strong adhesion to terrazzo and porous stone surfaces
• Supports long-term finish performance and appearance

🏢 Common Use Environments
• Commercial buildings
• Healthcare facilities
• Educational institutions
• Retail and hospitality spaces
• Industrial and institutional floor care programs

❓ Frequently Asked Questions

What types of floors is this sealer designed for?
It is designed specifically for terrazzo and other porous stone flooring surfaces.

Is this sealer compatible with high-gloss acrylic finishes?
Yes. It is formulated as a superior base coat for acrylic finishes subjected to burnishing and spray buffing.

How many coats of sealer should be applied?
Two coats are recommended to properly level the surface and maximize gloss potential.

Can this product be used on a floor that has not been stripped?
No. Always apply the sealer to a newly stripped, clean floor.

Does humidity affect drying time?
Yes. High humidity can prolong drying time between coats.

Is this product intended for residential use?
No. It is intended for industrial and commercial applications only.

🧪 Active Ingredient(s) or Core Composition
• Water – Base carrier for controlled application
• Acrylic Polymers – Provide film formation, adhesion, and durability
• Urethane Polymer – Reinforces strength, flexibility, and wear resistance
• Tributoxyethyl Phosphate – Enhances leveling and flow characteristics
• Methyl Pyrrolidone – Aids penetration and bonding to porous stone

📌 Directions for Use
Always apply sealer to a newly stripped floor. Use a clean, previously wrung-out rayon/cotton blend mop and a dedicated mop and bucket reserved only for sealer application. Begin by “framing” the area to be sealed, then fill in the framed area using a gentle side-to-side mopping motion, overlapping each pass slightly. Apply in a thin, unbroken line. If a rectangular applicator is used, ensure it has been thoroughly rinsed before use.

Allow each coat to dry to the touch before recoating; typical dry time is approximately 30 minutes, though high humidity may extend drying time. A fan may be used to reduce drying time after allowing the sealer to set for 10 minutes; do not use fans where dust could be blown onto the sealer. Apply a second coat using the same method.

For floors subjected to burnishing operations, apply a minimum of four coats of finish after sealing. For floors subjected to spray buffing operations, apply a minimum of two coats of finish.

⚠️ Safety & Handling
DANGER: Harmful if swallowed. May damage fertility or the unborn child and may cause damage to organs through prolonged or repeated exposure. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe mist or spray. Do not eat, drink, or smoke when using this product. Wear protective gloves, protective clothing, and eye protection. If swallowed, rinse mouth and contact a doctor or poison center. Store locked up. Keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Not regulated
Hazard Class: Not applicable
ID Number: Not applicable
Packing Group: Not applicable

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).