Fab Floors Safe-Strip Wax Stripping Concentrate

A non-ammoniated, low-odor wax stripping concentrate formulated to remove heavy accumulations of acrylic and synthetic floor finishes in professional floor care programs.

Overview
Fab Floors Safe-Strip Wax Stripping Concentrate is a powerful, low-odor floor finish remover designed to be used as an integral part of a scrub-and-rinse stripping program. The non-ammoniated formulation penetrates and breaks down multiple layers of acrylic and synthetic floor finishes while minimizing odor, making it well suited for use in health care facilities, food preparation areas, and other occupied spaces where strong fumes are undesirable. When used as directed, it delivers effective stripping performance while supporting controlled, professional floor maintenance workflows.

For Use On Finished Floors: Tile, Hardwood, Bamboo, Vinyl, Marble, Ceramic, Linoleum, Stone & Terrazzo

✅ What This Product Is Used For
• Removing multiple layers of acrylic and synthetic floor finishes
• Stripping wax buildup prior to refinishing
• Use in low-odor environments such as healthcare and food service areas
• Manual stripping with mops and rotary scrubbers
• Automated stripping with autoscrubbers

❌ What This Product Is Not For
• Residential floor maintenance
• Use without proper dilution
• Spot cleaning without full rinse procedures
• Application without mechanical agitation
• Use on surfaces not intended to be stripped

⚙️ Key Performance Advantages
• Non-ammoniated, low-odor formulation
• Effective on heavy finish buildup
• Compatible with rotary machines and autoscrubbers
• Designed for professional scrub-and-rinse programs
• Suitable for occupied or sensitive environments

🏢 Common Use Environments
• Healthcare facilities
• Food preparation and service areas
• Schools and universities
• Commercial buildings
• Institutional maintenance operations

❓ Frequently Asked Questions

Is this stripper safe for use in healthcare facilities?
Yes. Its low-odor, non-ammoniated formulation is ideal for healthcare and similar environments.

How much product should be diluted per gallon of water?
Dilute 8 to 16 ounces per gallon of warm water, depending on finish buildup.

How long should the stripping solution remain on the floor?
Allow the solution to remain on the floor for 5 to 10 minutes, without allowing it to dry.

Can an autoscrubber be used instead of a rotary machine?
Yes. When using an autoscrubber, two passes are recommended to complete the scrubbing process.

Is rinsing required after stripping?
Yes. Floors must be thoroughly rinsed with clean, cool water after stripping.

Is this product intended for consumer home use?
No. It is formulated for industrial and commercial use only.

🧪 Active Ingredient(s) or Core Composition
• Water – Base carrier for dilution and application
• Tripropylene Glycol Methyl Ether – Solvent that penetrates and loosens floor finish films
• Ethanolamine – Assists in dissolving wax and acrylic finish buildup
• Phosphoric Acid, Trisodium Salt, Dodecahydrate – Helps break down finish layers
• Cocamidopropyl Hydroxysultaine – Surfactant that enhances soil and finish removal

📌 Directions for Use
Dust mop the entire floor to remove loose dirt and debris. Prepare a stripping solution by diluting 8–16 ounces of product per gallon of warm water. Recommended dilution rates are based on floors with an accumulation of approximately 10 coats of floor finish. To confirm proper solution strength, test the diluted solution on a small area.

Flood the floor with the stripping solution using a wet mop and allow it to remain on the floor for 5–10 minutes. Do not allow the solution to dry. Scrub using a 175–300 RPM rotary floor machine equipped with a black stripping pad. If using an autoscrubber, make two passes to complete the scrubbing process.

Pick up the stripping residue with a wet vacuum or autoscrubber. Rinse by flooding the floor with clean, cool water and picking up the rinse solution. Complete the rinsing process by damp mopping with clean, cool water and a clean mop.

⚠️ Safety & Handling
DANGER: Causes severe skin burns and serious eye damage. Do not breathe mist or spray. Wash thoroughly after handling. Wear protective gloves, protective clothing, and eye protection. If swallowed, rinse mouth and do not induce vomiting. If on skin or hair, remove contaminated clothing and rinse with water. If inhaled, move to fresh air. If in eyes, rinse cautiously with water for several minutes and seek immediate medical attention. Store locked up. Keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Not regulated
Hazard Class: Not applicable
ID Number: Not applicable
Packing Group: Not applicable

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).