Fab Floors Effortless Floor Finish Remover

A powerful, no-scrub floor finish remover formulated to eliminate heavy accumulations of acrylic, natural, and synthetic floor finishes without machine scrubbing.

Overview
Fab Floors Effortless Floor Finish Remover is a high-strength, non-ammoniated stripping solution engineered to remove multiple layers of floor finish with minimal mechanical action. The formulation penetrates and breaks down heavy finish buildup, allowing effective removal through dwell time and light agitation rather than aggressive machine scrubbing. Designed for professional floor care programs, it delivers reliable stripping performance while reducing labor, noise, and equipment requirements when used according to directions.

For Use On Finished Floors: Tile, Hardwood, Bamboo, Vinyl, Ceramic, Linoleum, Stone, Terrazzo

✅ What This Product Is Used For
• Removing heavy accumulations of acrylic floor finishes
• Stripping natural and synthetic floor coatings
• Reducing labor by minimizing machine scrubbing
• Preparing floors for refinishing
• Professional scrub-and-rinse stripping programs

❌ What This Product Is Not For
• Residential consumer floor care
• Light daily cleaning or maintenance mopping
• Use without proper dilution
• Allowing solution to dry on the floor
• Use without proper personal protective equipment

⚙️ Key Performance Advantages
• Formulated for effective stripping without machine scrubbing
• Penetrates heavy finish buildup quickly
• Non-ammoniated formulation
• Compatible with wet vacs and autoscrubbers
• Designed for professional floor maintenance workflows

🏢 Common Use Environments
• Commercial buildings
• Healthcare facilities
• Educational institutions
• Retail and hospitality spaces
• Industrial and institutional floor care programs

❓ Frequently Asked Questions

Does this product really work without machine scrubbing?
Yes. It is formulated to remove heavy finish buildup through penetration and dwell time, with only light agitation required.

How many coats of finish can it remove?
Recommended dilution rates are based on floors with approximately 10 coats of applied floor finish.

Can this product be used with an autoscrubber?
Yes. Residue may be removed using a wet vacuum or autoscrubber after dwell time.

Is warm water recommended for dilution?
No. Only cool water should be used when diluting this product.

Can the stripping solution be allowed to dry on the floor?
No. The solution must remain wet during the stripping process.

Is this product intended for home use?
No. It is intended for industrial and commercial use only.

🧪 Active Ingredient(s) or Core Composition
• Water – Base carrier for dilution and application
• Butoxyethanol – Enhances penetration and finish breakdown
• Potassium Hydroxide – Alkaline agent that dissolves finish films
• Ethanolamine – Assists in breaking down wax and finish layers
• Pentasodium Triphosphate – Improves soil suspension and cleaning efficiency

📌 Directions for Use
Dust mop the entire floor to remove loose dirt and debris. Prepare a stripping solution by diluting 16–32 ounces of product per gallon of cool water. Recommended dilution rates are based on floors with an accumulation of approximately 10 coats of floor finish. To verify solution strength, apply diluted product to a small test area.
Flood the floor with the stripping solution using a wet mop and allow it to remain on the floor for 5–10 minutes. Do not allow the solution to dry. After approximately 5 minutes, agitate the solution with the stripping mop to place fresh solution in contact with the floor and complete the stripping process.

Pick up the stripping and finish residue with a wet vacuum or autoscrubber. Damp mop the floor with clean, cool water and a clean mop.

⚠️ Safety & Handling
DANGER: Causes severe skin burns and serious eye damage. Do not breathe mist or spray. Wash thoroughly after handling. Wear protective gloves, protective clothing, and eye protection. If swallowed, rinse mouth and do not induce vomiting. If on skin or hair, remove contaminated clothing and rinse with water. If inhaled, move to fresh air. If in eyes, rinse cautiously with water for several minutes and seek immediate medical attention. Store locked up. Keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Corrosive liquid, n.o.s.
Hazard Class: 8
ID Number: UN1760
Packing Group: III

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).