Fab Floors DustBane Dust Capture Solution

(20 Ounce Cans × 12 Cans Per Case)

A high-performance dust mop and cloth treatment aerosol formulated to capture dust, reduce airborne particles, and extend floor finish life without leaving slippery residue.

Overview
Fab Floors DustBane Dust Capture Solution is an oil-based dust control aerosol designed to improve dust pickup on mops and cloths while preventing dust from becoming airborne and resettling. The formulation attracts and holds dust, dirt, and lint so they can be easily removed during routine cleaning. When used as part of a regular maintenance program, it helps extend floor finish life, maintain appearance, and improve overall cleaning efficiency across a wide range of finished flooring surfaces.

For Use On Cloths & Dust Mops: All Floor Types, Furniture, Window Frames, Wood, Concrete, Blinds, Auto Interiors, Formica, Vinyl and Shelves

✅ What This Product Is Used For
• Improving dust pickup on mops and cloths
• Capturing dust to prevent airborne resettling
• Maintaining gloss on finished floors
• Extending the life of floor finishes
• Routine dust control in commercial spaces

❌ What This Product Is Not For
• Spraying directly onto floors or walking surfaces
• Wet cleaning or degreasing applications
• Outdoor use
• Use near open flames or ignition sources
• Residential household misuse

⚙️ Key Performance Advantages
• Oil-based formulation attracts and traps dust effectively
• Prevents dust from scattering during cleaning
• Heavy lint can be shaken or washed out of mops and cloths
• VOC compliant formulation
• Leaves no intentional floor coating or finish

🏢 Common Use Environments
• Commercial buildings
• Schools and universities
• Healthcare facilities
• Retail spaces
• Offices and institutional facilities

❓ Frequently Asked Questions

How does this product improve dust pickup?
The oil-based formulation increases the dust-attracting capability of mops and cloths, preventing dust from becoming airborne.

Can this be used on all floor types?
It is intended for finished resilient asphalt, vinyl, rubber, and linoleum floors when applied to mops or cloths only.

Should this product be sprayed directly on the floor?
No. Never spray directly onto floors, as the ingredients may make surfaces slippery.

How is the product applied correctly?
Spray lightly onto a mop or cloth, allow it to penetrate, then dust or mop as usual.

Is overnight treatment recommended?
Yes. Treating dust mops overnight provides the best dust capture performance.

Can mops and cloths be washed after use?
Yes. Heavy lint and dust can be shaken out or washed out, and the mop or cloth should be retreated after washing.

🧪 Active Ingredient(s) or Core Composition
• C11–15 Alkane/Cycloalkane – Solvent that aids dust attraction and suspension
• Mineral Oil – Attracts and holds dust particles
• Naphtha (Petroleum) Heavy Alkylate – Enhances cleaning performance
• Propane – Aerosol propellant
• Orange Terpenes – Fragrance and cleaning support components

📌 Directions for Use (Summary)
Hold dispenser upright 6–8 inches from mop or cloth. Spray a light mist directly onto the mop or cloth and allow it to penetrate before dusting or mopping. Reapply as needed during use. For best results, treat dust mops overnight. Shake out lint and wash mop or cloth after use, then retreat before the next application. Never spray directly onto floors and protect floors from overspray.

⚠️ Safety & Handling
DANGER: Extremely flammable aerosol. Harmful or fatal if swallowed. Contents under pressure. Do not spray on open flames or ignition sources. Do not smoke while using. Use with adequate ventilation. Avoid intentional misuse such as inhalation. Wear appropriate personal protection as needed. Store locked up and protect from heat. Keep out of reach of children.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Aerosols, flammable
Hazard Class: 2.1
ID Number: UN1950
Packing Group: Not applicable

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).