Fab Floors Dust-Lock Fiber Dust Trapper

An oil-free dust mop treatment formulated to trap dust within mop fibers, speed dusting operations, and protect floor finishes without leaving slippery residue.

Overview
Fab Floors Dust-Lock Fiber Dust Trapper is a specialty dust mop treatment designed to capture and hold dust inside mop fibers rather than allowing it to scatter or resettle on floor surfaces. Its oil-free, non-toxic, non-flammable formula improves dusting efficiency while eliminating the risk of oily buildup or slippery residue. Regular use helps reduce abrasive dust accumulation that can scratch finishes, shorten floor life, and increase the need for stripping and recoating.

For Use On Finished Floors: Tile, Hardwood, Bamboo, Vinyl, Marble, Ceramic, Linoleum, Stone and Terrazzo

✅ What This Product Is Used For
• Trapping dust and dirt in dust mop fibers
• Speeding routine dusting operations
• Reducing airborne dust and resettling
• Protecting floor finishes from abrasive debris
• Improving overall floor appearance and longevity

❌ What This Product Is Not For
• Picking up liquid spills
• Wet mopping or scrubbing
• Saturating dust mops
• Residential household misuse
• Use on frozen or improperly stored mops

⚙️ Key Performance Advantages
• Oil-free formula leaves no slippery residue
• Non-toxic and non-flammable for safer use
• Improves dust capture efficiency in mop fibers
• Easily removed through routine laundering
• Helps reduce finish wear caused by abrasive dust

🏢 Common Use Environments
• Commercial buildings
• Schools and universities
• Healthcare facilities
• Retail spaces
• Institutional maintenance programs

❓ Frequently Asked Questions

How does this product trap dust differently than oil-based treatments?
It uses an oil-free formulation that captures dust within mop fibers without leaving residue on floors.

Will this product make floors slippery?
No. The oil-free formula is designed specifically to avoid slippery residue.

How much product should be applied to a dust mop?
Approximately 2 fluid ounces per foot of dust mop length is recommended.

Does the mop need to dry before use?
Yes. Treated mops must dry for at least 6 hours before use.

Can dust mops be washed after use?
Yes. When mops become soiled, they should be laundered, allowed to dry, and then retreated.

Is this product safe for frequent use?
Yes. Routine use helps prevent dust buildup and finish damage when used as directed.

🧪 Active Ingredient(s) or Core Composition
• Water – Primary carrier for controlled application
• Propylene Glycol – Helps trap and suspend dust in fibers
• Sodium Laureth Sulfate – Improves dust capture efficiency
• Ethanol – Supports drying and dust retention
• Dipropylene Glycol – Enhances penetration into mop fibers
• Hexyl Cinnamal – Fragrance component

📌 Directions for Use
Spray directly onto an untreated, clean dust mop, using enough product to thoroughly moisten all fibers without saturating the mop. Apply approximately 2 fluid ounces per foot of dust mop. Allow treated mops to dry for at least 6 hours before use.

After use, shake the mop vigorously outdoors or over a sheet of paper to release accumulated dust and dirt. If fine dust continues to release, launder the mop, allow it to dry completely, and retreat. Routine washing removes all traces of the treatment and prevents residue accumulation.

⚠️ Safety & Handling
WARNING: Causes serious eye irritation. Wash thoroughly after handling. Wear eye protection. If product gets in eyes, rinse cautiously with water for several minutes and seek medical attention if irritation persists. Keep out of reach of children. Use with adequate ventilation and proper handling practices.

🚛 Shipping & Compliance Notice
Proper Shipping Name: Not regulated
Hazard Class: Not applicable
ID Number: Not applicable
Packing Group: Not applicable

General Usage Limitation

This product is intended for professional, commercial, or industrial use only unless otherwise stated. The user is solely responsible for determining suitability for any specific application and for ensuring compliance with all applicable laws and regulations. Seismic Blends makes no warranties, express or implied, regarding fitness for a particular purpose or use beyond those explicitly stated. Misuse, improper handling, or failure to follow safety guidelines may result in damage or injury. Always review the Safety Data Sheet (SDS) and use appropriate personal protective equipment (PPE).